100 square metre home theater

-7.2 matrix
-3 x 720Watt active 2-way satellite monitors as LCR
-6 x 160Watt passive LineSource LS200/8 SUR surround
-4 x 160Watt passive LineSource LS200/8 SUR Backsurround
-2 x 1500Watt of active subwoofer

This example shows the arrangement of LineSources as surround / surround back speakers. The Linesources have no built-in crossover and thereby they can be clustered according to Ohm's law in any order. So the amplifier channels can be burden ideal allways. The front speaker is already fully active.

LCR Left, Center, Right

 

Each 3x VoicePoint SAT aktiv Monitor
720 Watt active
LF:600 Watt
HF 120 Watt
HP cinema mode: 80Hz
max. SPL: above 120dB
Frequence range: 55Hz-22.000Hz
HBT: 700 x 450 x 350mm

SUR Surround

For the surround channels, 3 LineSources be used per side.
To not unnecessarily burden the impedance of the multi channel amplifier, two LS200 (resistance 80Ohm) are connected in series and the third parallel with a total of 5.6Ohm.

je 3x VoicePoint  LS200/8

160 Watt on 4 Ohm
HP cinema mode: 100Hz
max. SPL: above 110dB
Frequence range: 100Hz-20.000Hz
HBT: 2000 x 60 x 130mm

SUR Backsurround

For each of the surround back channels is used a LS200..

Each 2x VoicePoint  LS200/8

160 Watt on 4 Ohm
HP cinema mode: 100Hz
max. SPL: above 110dB
Frequence range: 100Hz-20.000Hz
HBT: 2000 x 60 x 130mm

SUB Subwoofer

Two subwoofers provide a uniform low-frequency energy distribution and the live factor in the home theater

2x VoicePoint SUB
1500 Watt active
LP cinema mode: 100Hz
max. SPL: above120dB
Frequence range: 20Hz-100Hz
HBT: 700 x 1000 x 500mm